Craft Wars: Glitter Spray Paint
You can never have enough glitter. Seriously. Which is why we’re loving the best new way to add shimmer to your crafting: glitter spray paint. Check out these three creative projects that make the most of this awesome DIY supply.
First up, LIz from Gimme Some Style creates glittery canvas bags.
Here’s how she did it:
For materials, you’ll need: a canvas zippered bag or bag of your choice (the one shown was in a set of three bought from Hobby Lobby for $5), Krylon Glitter Blast spray paint in the color of your choice, painters tape or masking tape, embroidery thread and needle, and Krylon Glitter Clear Sealer.
Prep your bag. Tape your bag in a design of your choice. You may find a stencil easier for circular shapes. The examples shown are a chevron and circular pattern. Make sure you apply the tape securely and with no gaps to ensure best results.
Spray the bag. Using the Krylon Glitter Spray paint, spray the bag on the exposed part of the canvas. Make sure to use thin and even coats. The bags shown have two coats, then a clear sealer on top to prevent the glitter from flaking. Allow the paint to dry completely while the tape is still on, then remove the tape.
Stitch it up. If you like, take a little embroidery thread and stitch an accent design or lettering.
Perfect little bags for storing pens, beauty supplies, or any other little goodies.
Next up, Erin from Thanks I Made It creates a sparkly necklace.
You can make one too!
Supplies you’ll need: Scissors, pretty string (the necklace shown is made from mason line from a hardware sore), plain beads, and glitter spray paint.
String the beads. Using a long piece of the mason line, string the beads loosely and hang outside to spray with the glitter paint, following the directions on the can. Let the beads dry.
Cut another piece of string, about 48” long. Fold the string in half, and thread a bead over a loop.
Pull down to the center of the doubled string. Tie a knot on either side of the bead.
Add another bead on either side of the center bead. You can add as many beads with knots in between them as you like.
Tie a knot on both ends of the string, making a loop with one end and a double knot with the other. Push the knot through the loop for the necklace closure.
And done! A shimmery accessory for day or night.
Next up, Honor at Home Heart Craft makes a lamp that shines in more ways than one.
Make your own shimmery decor by following these steps:
Gather the following supplies: A lamp base, a roll of tin foil, a towel or cardboard, Rust-Oleam crystal clear enamel, and Krylon Glitter Blast spray paint. The Glitter Blast works on a variety of materials such as metal, glass, plastic and wood. So really almost any type of lamp base could work. A clean smooth surface works best.
Lay out the cardboard or towel. Be sure to work in a well ventilated area (like outside). Remove the lampshade and light bulb. Then wrap all the parts of the lamp that you don’t want to get paint on such as the bulb socket and cord with tin foil.
Lay the lamp down on its side. Shake the Glitter Blast really well. Working in small light bursts, cover the lamp base with the glitter blast spray, holding the spray can approximately 10” to 12” away. This is really runny paint and will drip so it is best to do in light layers. Let it sit five minutes before doing another coat. After 20 minutes turn the lamp base over and repeat on the other side. Let set for 20 minutes then turn upright. Do any touch ups if needed.
Note: The Glitter Blast can be tricky to work with, occasionally spraying and sputtering to a stop. It also comes out quickly so use a light touch. This project used up a whole can, so if your lamp is larger, load up on multiple cans.
After 20 minutes of dry time, seal the glitter with the clear coat. With the lamp base standing upright, coat it with a few quick light sprays. Let dry for at least 2 hours before handling.
Optional: Create a custom lampshade to match. You will need your lampshade, a pencil, and the ‘writer’ kind of gold glitter puff paint.
Lightly sketch out your design with pencil.Then, working slowly and from top left to bottom right, trace your pencil lines with the puff paint. Continue on all sides of the lampshade. Let dry overnight before handling.
Assemble the base and lampshade, and light her up!
Which glitter DIY are you dying to try? Leave us a message on the comments and let us know!
Pippa Armbrester is a quilt maker and designer. Follow her adventures in life and in quilting on her blog.